این کار وقت گیره و انرژی و زمان زیادی برای انجام دادن اون نیازه. اگه از پچ کورد استفاده کنین از اتلاف وقت جلوگیری کردین و دیگه نیازی به هزینه اضافی برای نیروی انسانی و ابزار و انرژی کنین.

ممکنه موقع سوکت زدن کابل شبکه سیم‌ها اشتباه پانچ بشن و انتقال داده رو دچار مشکل کنن. پچ کورد های شبکه این مشکل رو ندارن چون در کارخونه سازنده تولید شدن و مورد تست‌های مختلف قرار گرفتن که کیفیت اتصالات رو بالا ببرن.

پچ کورد ها معمولا در طول‌های کوتاه تولید میشن پس اتلاف کمتری دارن و احتمال تاثیر گذاری نویز روی اون‌ها کمتره.

توضیحات انگلیسی:

کابل پچ کورد CAT6 UTP بلدن طول 0.3 متر کابلی بدون شیلد و فویلد می باشد و برای استفاده از پچ پنل و سوئیچ مناسب می باشد، این کابل با روکشی از جنس PVC  می باشد که از مقاومت بالایی برخوردار است که از هرگودنه کشیدگی و یا پیچخوردگی جلوگیری می کند و مانع کم شدن عمر و یا خراب شدن آن می شود.

Belden CAT6 UTP patch cord cable, length 0.3 m

Belden CAT6 UTP patch cord cable, 0.3 meters long, is a cable without shield and foil
and is suitable for patch panel and switch use. prevents it from shortening its life or spoiling it.
What is a patch cord?
You have probably heard the name of network cable or LAN cable by now and even
used them to connect your computer or laptop to the connection modem, I must say
that its name is patch cord. Now what is a patch cord? A patch cord is the same
as a network cable, with the difference that it is shortened and a socket is placed on both ends of it.
Network patch cord is one of the basic equipment of passive network which is used

to connect the components of a network. Active equipment such as switches, routers, computers
or servers can be connected to each other using patch cords or patch panels. Patch cord cables are

used for audio and video transmission, but network patch cords are mad

e up of twisted pairs that transmit information.
A patch cord is actually a short network cable (from 0.5 to 20 meters)
with an RJ45 socket installed at both ends.
In further explanation of what patch cord is, it should be said that every patch cord or network cable
has a type of cover for the wires inside, which are known as shields and prevent possible noise and
data loss over long distances.
U/UTP or UTP patch cord
As its name suggests, this type of patch cord does not have any shields either for the pairs of wires or for all 4 pairs.
FTP or F/UTP patch cord
The twisted pairs of wires in this type of patch cord are protected by a foil that covers all 4 pairs.
S/UTP patch cord
Patch cords that have an overall woven shield or Braid Screen around all
pairs of wires, but do not have a cover for each pair of wires, are known as S/UTP.
The difference between patch cord and network cable
Any user can take any length of network cable and plug both ends and use
it to connect network equipment. But this work has problems:
This is time-consuming and requires a lot of energy and time to do it. If you

use patch cord, you avoid wasting time and don’t need to spend extra money

on manpower, tools and energy.
When plugging the network cable, the wires may be punched wrongly and cause

data transmission problems. Network patch cords do not have this problem because
they are produced in the manufacturer’s factory and subjected to various

tests to improve the quality of connections.
Patch cords are usually produced in short lengths, so they have less loss
and the possibility of noise affecting them is less.